older triac -1986 vintage

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
John Reesby
Posts: 2
Joined: Thu 23 Mar , 2006 15:50 pm

older triac -1986 vintage

Post by John Reesby » Sun 26 Mar , 2006 8:36 am

Daft question - How do I get access to the circuit boards, do they slide out on a tray via the hinged panel at the rear of machine or do they come out from the front?
Top
shakey j
Posts: 21
Joined: Fri 10 Mar , 2006 20:18 pm
Location: Birmingham UK

Re: older triac -1986 vintage

Post by shakey j » Sun 26 Mar , 2006 12:26 pm

John Reesby wrote:Daft question - How do I get access to the circuit boards, do they slide out on a tray via the hinged panel at the rear of machine or do they come out from the front?
Undo the three screws at the front of the top cover then the unit pulls out from the front.

HTH

Mark
Top
Post Reply

Return to “Triac”