Starturn 5 Toolblock

All info relating to the Denford StarTurn CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Leadheaded
Posts: 2
Joined: Wed 18 Apr , 2012 15:56 pm
Hardware/Software: Micromill & Starturn

Starturn 5 Toolblock

Post by Leadheaded » Tue 14 Jul , 2015 18:59 pm

Has any one experience of fitting a tool block to a Starturn 5 (slant bed)?
I presume I would fit the block and then back bore/drill and ream the holes on their respective pitches.
Really only need the method of fixation to the machine cross slide plate.

Post Reply