Denford Software & Machines

Posted: **Fri 31 Aug , 2018 10:03 am**

I was just wondering if anyone knows what diameter the spindle pulley bore is and the keyway size is?

Looking to put a taper lock HTD pulley on it with a servo motor to upgrade an indexing spindle.

Thanks,

Rob

Posted: **Sat 01 Sep , 2018 14:59 pm**

Spindle pulley is 30mm dia, keyway is ~8mm wide and ~3mm deep (into the pulley)

Spindle pulley is ~61.7mm dia

Motor pulley is ~ 34.7mm dia

Pulley ratio is therefore ~ 1.778:1

Denford Software & Machines

Orac Spindle Pulley Bore + Keyway size

Orac Spindle Pulley Bore + Keyway size

Re: Orac Spindle Pulley Bore + Keyway size