Orac electrical and PCB drawings schematics

All info relating to the Denford ORAC CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Orac electrical and PCB drawings schematics

Post by Denford Admin » Wed 06 Sep , 2006 15:26 pm

Many thanks to clarkea1 for these scanned drawings from a (1984 ish) vintage ORAC
Download the zipped up TIF images here (about 1Mb each file)

http://www.denfordata.com/downloads/dos ... RCAL-1.zip
and
http://www.denfordata.com/downloads/dos ... RCAL-2.zip

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Orac electrical and PCB drawings schematics

Post by Denford Admin » Wed 22 Jul , 2009 10:38 am

Have combined the above downloads into a single .PDF for ease of use (sorry if page order is random though)
Attachments
Orac-Electronic-Diagrams.pdf
(2.7 MiB) Downloaded 1638 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Orac electrical and PCB drawings schematics

Post by Denford Admin » Thu 20 Jan , 2011 15:56 pm

Some more ORAC electrical info:
Attachments
Orac-1985-Book-1-GSM-Syntel-Electrical-Drawings.pdf
(3.68 MiB) Downloaded 1389 times
Orac-Electrical-Drawings-GSM-OCR.pdf
(2.24 MiB) Downloaded 1603 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Orac electrical and PCB drawings schematics

Post by Denford Admin » Wed 07 Sep , 2011 16:36 pm

Orac mk3 electrical drawings:
Attachments
Orac-mk3-electrical-drawings-small.pdf
(4.06 MiB) Downloaded 1199 times

Post Reply