Manuals and cam software for Novaturn

dg · Post by dg » Mon 26 Mar , 2007 18:27 pm

Hello all,

I have just got a new novaturn lathe so there may be a few questions i'm afraid....

First of all, does the novaturn lathe come with a instruction manual itself (i.e. for the machine not the software) ? I guess there isn't much to say but it would be nice to know if there is one.

Secondly what CAM software do people use with the lathes. I guess for most parts it isn't really needed but it would be handy for some. I've looked at a few and those that handle things like threading appear to be very expensive.

Many thanks in advance.

David.

Post by **Denford Admin** » Tue 27 Mar , 2007 9:49 am

what CAM software do people use

At the moment, we only have our fairly basic LatheCAM software available

We are currently working on a fantastic new Lathe CAD CAM system

which will allow you to design a part, import profiles from other CAD systems and automatically pick the right tools to make the part (including threading)
For the moment though, you may have to keep searching for something

As for the Machine Manual, there is one available and I will put a link to it on the downloads section here.

Post by **Denford Admin** » Tue 27 Mar , 2007 10:08 am

Here is the post to get the machine manual:

viewtopic.php?p=2705

dg · Post by dg » Tue 27 Mar , 2007 12:24 pm

The manual is great - thanks for your help!

One more quick question - Ddo you still sell the lathecam software as it sounds like it is worth a try?

Post by **Denford Admin** » Tue 27 Mar , 2007 13:04 pm

Hi David,

Apparently you should have got a free copy with the new machine anyway ?
I'll sort and send a copy out for you today if you didn't

dg · Post by dg » Tue 27 Mar , 2007 13:07 pm

Thanks again

JMauCruz · Post by **JMauCruz** » Thu 16 Aug , 2007 18:27 pm

Denford Admin

Can you send a LatheCAM free copy to me too?

Post by **Denford Admin** » Fri 17 Aug , 2007 10:34 am

See here, for LatheCAM manuals:

viewtopic.php?p=3771#3771

JMauCruz · Post by **JMauCruz** » Fri 17 Aug , 2007 18:08 pm

hi, again

i had latheCAM software and i think its a very good CAM software, but i loose the disk of the software and i dont have a copy.

Do you still sell the LatheCAM software?
How can i get a copy of LatheCAM software?

Post by **Denford Admin** » Mon 20 Aug , 2007 8:51 am

The CD image can be found here:

http://www.website.denford.ltd.uk/suppo ... -downloads

You will still need to have your dongle or license code disk for it to run though

Denford Software & Machines

Denford Software & Machines

Manuals and cam software for Novaturn

Manuals and cam software for Novaturn

No I just got VR Turning