New User here...hi guys! Threading Question...

All info relating to the Denford NovaTurn CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
DWard MOCC
Posts: 1
Joined: Mon 01 Dec , 2014 21:23 pm
Hardware/Software: Novamill with VRMilling ver. 2.31.3.951

New User here...hi guys! Threading Question...

Post by DWard MOCC » Fri 19 Dec , 2014 20:07 pm

We have a Novaturn here in class and we are trying to use the canned threading cycles. We've used G33 G76 and G92 and are not able to get any of these to work on the lathe. We can get them to roll on the 2d and 3d simulator, however the machine just rolls up to the part and hangs out! :delirious:

Does anyone out there know if our Novaturn with VR turning version 1.20.2.425 is able to run threads?

Thanks so much!

Doug in Michigan USA

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: New User here...hi guys! Threading Question...

Post by Martin » Tue 23 Dec , 2014 0:45 am

It sounds like the spindle encoder may be faulty. Can you check the Z pulse in to the control.

Post Reply