Type of motor used in Novaturn.

All info relating to the Denford NovaTurn CNC lathes

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
amir
Posts: 7
Joined: Tue 19 Nov , 2013 9:20 am
Hardware/Software: CNC Novaturn, turning machine

Type of motor used in Novaturn.

Post by amir » Tue 19 Nov , 2013 9:25 am

may i know the type of motor that been used in novaturn. the original motor.

Martin
CNC Guru
CNC Guru
Posts: 1807
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Type of motor used in Novaturn.

Post by Martin » Tue 19 Nov , 2013 10:01 am

I think all the Novaturns were fitted with a S.E.M. MT30U4-36 spindle motor.

If you have the serial number of the machine we should be able to check on the individual record sheet.

amir
Posts: 7
Joined: Tue 19 Nov , 2013 9:20 am
Hardware/Software: CNC Novaturn, turning machine

Re: Type of motor used in Novaturn.

Post by amir » Tue 19 Nov , 2013 17:30 pm

ill will find the serial number.. ty for your help

Post Reply