ST5/108 Drawing - Chuck backplate

All info relating to the Denford NovaTurn CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

ST5/108 Drawing - Chuck backplate

Post by Denford Admin » Mon 08 Apr , 2013 9:50 am

ST5/108 Chuck backplate for NovaTurn and possibly Starturn.
Used with Pratt 80mm 3 Jaw chuck 9580-00805
Attachments
ST5_108.pdf
(62.26 KiB) Downloaded 1306 times

Post Reply