Draw bar force?

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
ross77
Posts: 6
Joined: Fri 15 Dec , 2017 9:16 am

Draw bar force?

Post by ross77 » Thu 21 Nov , 2019 1:18 am

Does anyone know the draw bar force on the Nova mill?

I'm looking to build a Power drawbar that's different from the standard so want to check what forces are required.

The standard ATC uses 27 Bellville's compressed by 3mm when holding a tool. From my calculations that only gives 500N pull force which seems low.

Post Reply