Help finding replacement part

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Chestnut84
Posts: 5
Joined: Tue 15 Jan , 2019 19:44 pm

Help finding replacement part

Post by Chestnut84 » Tue 15 Jan , 2019 20:02 pm

I have a novamill that I have decided to get going using Mach 3. I was able to get the x, y, z axis moving via a din connector on the 96 pin after pulling out the (denstep board) not sure if that's correct. Anyway I had a friend playing around jumping to different things trying to get the spindle going and now I don't have any motion. It looks like a small transformer on the Baldor f391 issue 1 board is bad. I can't seem to find that part. Any help or advice would be greatly appreciated. I'd like to
1. Replace the transformer
2. Replace the Baldor board
3. Go different route with a different motion controller
Not sure what would be best or easiest at this point
IMG_20190109_145904.jpg
IMG_20190109_145904.jpg (863.83 KiB) Viewed 6423 times
1547429135693.jpg
1547429135693.jpg (229.64 KiB) Viewed 6423 times

User avatar
Iron-Man
CNC Apprentice
CNC Apprentice
Posts: 78
Joined: Mon 28 Feb , 2011 9:40 am
Hardware/Software: Modified NovaTurn with Yaskawa AC Servos +-10V, PathPilot running on a GizmoSphere 1 with Ibob2 PCIE interface that I designed. Denford Triac to be modified with AC Servos.

Re: Help finding replacement part

Post by Iron-Man » Fri 25 Jan , 2019 16:55 pm

I found these two links. Hope it helps you to identify the part.

FERROXCUBE RM8/I-3C85-A250

https://www.enrgtech.co.uk/buy/product/ ... M6S-I-3C85

https://www.tme.eu/en/details/rm8_i-3c8 ... erroxcube/

Hope this helps,

Iron-Man

Post Reply