Where ToGet Replacement Parts For Novamill

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
erdemkilic
Posts: 3
Joined: Fri 25 Aug , 2017 3:18 am
Hardware/Software: Novamill,Novaturn

Where ToGet Replacement Parts For Novamill

Post by erdemkilic » Fri 25 Aug , 2017 3:24 am

Hi I recently buy a Novamill the serial number is U00037. But it is missing table to saddle Gib and belt for Y axis. Can any body help me as "Where to buy it?". I am located in Massachusetts ,USA.
Regards
Erdem Kilic

erdemkilic
Posts: 3
Joined: Fri 25 Aug , 2017 3:18 am
Hardware/Software: Novamill,Novaturn

Re: Where ToGet Replacement Parts For Novamill

Post by erdemkilic » Fri 25 Aug , 2017 16:18 pm

One more thing: Is there any body that can supply technical size information for the Novamill's table to saddle gib?

Ben L
CNC Apprentice
CNC Apprentice
Posts: 53
Joined: Tue 23 Aug , 2016 23:13 pm
Hardware/Software: Novamill - Mach 3

Re: Where ToGet Replacement Parts For Novamill

Post by Ben L » Tue 29 Aug , 2017 8:23 am

Hi mate, the belt for the y axis is a timing belt type t5, available at most part shops. measure the length of it. at a guess it will be 200mm . so T5 -200.

You wont buy the Gib strip off the shelf unless you are lucky, have one made though. i dont know the dimensions though sorry.

erdemkilic
Posts: 3
Joined: Fri 25 Aug , 2017 3:18 am
Hardware/Software: Novamill,Novaturn

Re: Where ToGet Replacement Parts For Novamill

Post by erdemkilic » Sun 03 Sep , 2017 14:30 pm

Thank you for the reply Ben. I found a belt . Still struggling with finding / having someone to make a gib though...

Post Reply