Novamill fail on G02

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
Posts: 6
Joined: Thu 28 Apr , 2011 14:26 pm
Location: Leeds

Novamill fail on G02

Post by donm0098 » Sun 11 Jun , 2017 2:10 am

I am running a Novamil with VR milling version 2. The machine has been working fine up to now, but it has failed to execute the G02 instruction correctly.

This is the line that caused the problem.
It should cut a semicircle at 45 degrees. But when this line executes, the machine goes into a dither and never gets past the line. The bed oscillates and eventually loses calibration.

A similar line
works fine. This is a horizontal semi circle.

If I run the code in virtual machine mode, it works as expected.

Any help with this problem will be greatly appreciated.

CNC Guru
CNC Guru
Posts: 1806
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Novamill fail on G02

Post by Martin » Tue 13 Jun , 2017 12:51 pm

You may need to update the software to the latest version VRMilling 2.32. It's a free download but make sure you have a copy of the licence file first. ... s-support/

Also what version of Emprom do you have on the control card? It should be 2.0 Beta or 2.1.

Post Reply