Tee Nut size?

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
moray
CNC Expert
CNC Expert
Posts: 102
Joined: Thu 12 Sep , 2013 20:02 pm
Hardware/Software: Triac VMC

Tee Nut size?

Post by moray » Mon 09 Dec , 2013 21:48 pm

Can anybody confirm what size of Tee nuts I need for a Novamill?

I've just agreed to buy one, and would like to get some ordered ready for it arriving.
The manual I've found says the tee slots are 10mm, so would just like to confirm that means the gap is 10mm with the wide part being aprox. 15mm.
Top
angel-tech
CNC Guru
CNC Guru
Posts: 525
Joined: Tue 14 Nov , 2006 12:12 pm
Hardware/Software: .....
4 Quatros
3 Oracs
2 Easiturn atc
12 station lathe atc
Mach 3
Location: Quatroland

Re: Tee Nut size?

Post by angel-tech » Mon 09 Dec , 2013 22:50 pm

8mm threaded. Gap is 10mm.
Top
moray
CNC Expert
CNC Expert
Posts: 102
Joined: Thu 12 Sep , 2013 20:02 pm
Hardware/Software: Triac VMC

Re: Tee Nut size?

Post by moray » Tue 10 Dec , 2013 0:47 am

Thanks for that. Set now ordered!
Top
Post Reply

Return to “Novamill”