NOVAMILL TO MACH 3 Conversion

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

User avatar
dixonsca
CNC Apprentice
CNC Apprentice
Posts: 69
Joined: Tue 19 Sep , 2006 17:04 pm
Hardware/Software: Denford Magnum router. (now upgraded to a 3d router using retrofit kit macmotion controller and upgraded stepper motors)
Triac PC
Nova mill
Microrouter
Turn 270 Pro
Unimatic 4th axis
Makerbot Replicator 2
VR Milling 5
techsoft 2d design
corel draw
solidworks
artcam
lathecam designer
quickturn 2d
Location: Bradford
Contact:

Re: NOVAMILL TO MACH 3 Conversion

Post by dixonsca » Mon 24 Jan , 2022 11:01 am

RNR107 wrote:
Mon 16 Apr , 2012 16:33 pm
Hi Rich,
Where are you based?
If you can bring the Mill to me (Bradford BD18) I'll do the conversion for you for 50 quids. (not including the parts ofcourse)...

Laurent.

Hi Laurent. I realise this thread is many years old now but is this still an option?

RNR107
CNC Apprentice
CNC Apprentice
Posts: 42
Joined: Mon 21 Feb , 2011 9:22 am
Hardware/Software: TRIAC, ORAC, Mach3
Location: West Yorshire

Re: NOVAMILL TO MACH 3 Conversion

Post by RNR107 » Wed 26 Jan , 2022 22:16 pm

dixonsca wrote:
Mon 24 Jan , 2022 11:01 am
Hi Laurent. I realise this thread is many years old now but is this still an option?
Hi Dixonsca,
Wow!!! This brings back memories! :D
This was a looooooooooooooooooong time ago!

To answer your question, yes this still an option but as you said it was a long time ago, so I'll have to increase the cost a fair bit.
And will have to do some digging to see if I can find the schematics and pictures I took at the time.

PM me with your email address if you want to talk more. Your name would be nice as well ;-)

Laurent

Post Reply