Combivert E.PL error

All info relating to the Denford Mirac lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
darren2310
Posts: 3
Joined: Wed 12 Jan , 2022 8:04 am
Hardware/Software: Mirac 1994.
Dos.

Combivert E.PL error

Post by darren2310 » Wed 23 Feb , 2022 11:17 am

Hi, my Mirac has a problem associated with the spindle and tool changer. The machine will operate as normal for about half an hour before the spindle or tool changer will fail while running a program and the inverter (KEB Combivert) will display E.PL. Does anybody have an idea what the problem may be? After a full isolator shutdown the machine will function again for half an hour…,

Post Reply