Dismantling MIRAC PC of mid 1990's vintage
Posted: Thu 22 Mar , 2018 13:36 pm
I have a MIRAC PC that I don't know the age as the label is missing but possibly mid 1990's.
This is the style of MIRAC with the large black electronics box permanently fixed to the machine and uses a LBC3 controller board
I'm trying to remove - lift off - the white enclosure to facilitate grit blasting and re-spraying but at the moment it's defeating me. It looks as though it is just held by a series of M4 cap screw about the periphery, but something else is holding it up at the top and rear ie above the lathe itself, where there seems to be a built in metal trunking cavity.
Has anyone pulled one of these apart before? Has anyone any drawings or photo of the dismantled casing?
Any help would be appreciated.
This is the style of MIRAC with the large black electronics box permanently fixed to the machine and uses a LBC3 controller board
I'm trying to remove - lift off - the white enclosure to facilitate grit blasting and re-spraying but at the moment it's defeating me. It looks as though it is just held by a series of M4 cap screw about the periphery, but something else is holding it up at the top and rear ie above the lathe itself, where there seems to be a built in metal trunking cavity.
Has anyone pulled one of these apart before? Has anyone any drawings or photo of the dismantled casing?
Any help would be appreciated.