Will the MINT CHIP 2.1 run VR Milling Ver 2 on a Smartstep ?

General support, help and advice for Denford CNC machines (old and new)

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Will the MINT CHIP 2.1 run VR Milling Ver 2 on a Smartstep ?

Post by bradders » Fri 01 Jul , 2011 10:37 am

Customer Asks ..............

Will the MINT CHIP 2.1 run VR Milling Ver 2 on a Smartstep ?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: Will the MINT CHIP 2.1 run VR Milling Ver 2 on a Smartstep ?

Post by bradders » Fri 01 Jul , 2011 10:38 am

Yes it should do

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Will the MINT CHIP 2.1 run VR Milling Ver 2 on a Smartstep ?

Post by Denford Admin » Tue 23 Aug , 2011 8:39 am

As far as I know the only issue could be the clock speed on the smartstep top board - double check that it's 16Mhz and not 12Mhz

Post Reply