heidenhain TNC 355

General support, help and advice for Denford CNC machines (old and new)

Moderators: Martin, Steve, Mr Magoo

Post Reply
samCNC
Posts: 1
Joined: Fri 07 Sep , 2007 15:30 pm
Location: Rijeka,Croatia

heidenhain TNC 355

Post by samCNC » Fri 07 Sep , 2007 15:42 pm

I recently bought a micron W32 f whit heidenhaim TNC 355 control but i dont have a users manual! machine should have a graphics but i dont know how to use it so if enybody knows how to use it or have users manual it will be a great help!
thanx
ciao
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Post by Denford Admin » Thu 20 Sep , 2007 14:05 pm

Hi, I have scanned it in - you can get it from this post:

viewtopic.php?p=3945#3945
Top
Post Reply

Return to “Machines”