Y - axis Jog

All info relating to the Denford MicroRouter Compact small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
rharrison444
Posts: 1
Joined: Tue 05 Apr , 2022 10:01 am
Hardware/Software: MicroRouter Compact

2D Designer
VR Milling

Y - axis Jog

Post by rharrison444 » Tue 05 Apr , 2022 10:13 am

I can home the machine but when jogging to position for the datum with the keyboard commands the machine seems to get stuck before it reaches the limit. Have tried a bit of backwards and forwards on the y - axis but this has not worked. Any suggestions?

Post Reply