Hi..
Just got a Microrouter Compact - It came with these 2 tools - Any idea what they are and how you use them? Im guessing one is for setting the tool height, but there's no mention of it in the manual.
Cheers..
Matt
Microrouter Compact - Part Identification
Moderators: Martin, Steve, Mr Magoo
Re: Microrouter Compact - Part Identification
Hi Mat
The picture don`t seem to be showing.
The picture don`t seem to be showing.
-
- Posts: 3
- Joined: Fri 29 May , 2020 10:05 am
- Hardware/Software: Triac, Orac, Microrouter Compact, various lasers and a new 3d fiber laser on the way. Oh.. plus an underground bunker to house it all.. lol
Re: Microrouter Compact - Part Identification
Think it's showing now.. Hopefully.. Lol
-
- CNC Guru
- Posts: 613
- Joined: Tue 29 Apr , 2014 18:38 pm
- Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
Re: Microrouter Compact - Part Identification
they look to be part of the kit for the 'F1 in Schools' system. is there a red anodised frame they will fit fixed to the bed. each but would fix to either end of a block of balsa wood of set dimension. This would be mounted in the frame and machined then using the flats on the square would be rotated 90 or 180 then machined again to make F1 styled racing cars.
Pete
Pete
Re: Microrouter Compact - Part Identification
Correct They are parts for the old style F1 in schools fixture with black rails.
-
- Posts: 3
- Joined: Fri 29 May , 2020 10:05 am
- Hardware/Software: Triac, Orac, Microrouter Compact, various lasers and a new 3d fiber laser on the way. Oh.. plus an underground bunker to house it all.. lol
Re: Microrouter Compact - Part Identification
Many thanks both..
I've not got the other parts, but I can see how it would work.
I'm probably going to run pathpilot on it as auto tool length setting would be great.
I've not got the other parts, but I can see how it would work.
I'm probably going to run pathpilot on it as auto tool length setting would be great.