Hi,
Just picked up a microrouter Compact 2005.
Has a fourth axis attachment I wish to remove,any advice or documnetation for the correct procedure involved.
Thanks,
Brian
Removing the 4th Axis
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 7
- Joined: Fri 24 Nov , 2017 10:04 am
- Hardware/Software: Denford Microrouter Compact 4th axis 2005
-
- Posts: 7
- Joined: Fri 24 Nov , 2017 10:04 am
- Hardware/Software: Denford Microrouter Compact 4th axis 2005
Re: Removing the 4th Axis
Forget it,
Got it sorted a very straightforward twist and slide.....a previous post involving cut wires had me spooked!
Got it sorted a very straightforward twist and slide.....a previous post involving cut wires had me spooked!
Re: Removing the 4th Axis
Glad it's sorted.
-
- Posts: 7
- Joined: Fri 24 Nov , 2017 10:04 am
- Hardware/Software: Denford Microrouter Compact 4th axis 2005
Re: Removing the 4th Axis
As an add on after the removal I came into an error indicting 0% federate.
This was solved by going into setup machin parameters and unticking the “federate pot” option
FYI passwords “denny”!
This was solved by going into setup machin parameters and unticking the “federate pot” option
FYI passwords “denny”!