Denford Software & Machines

Posted: **Fri 13 Jan , 2012 16:36 pm**

Running Windows XP and VR CNC Milling 2.28 This is the first problem with the machine. Any suggestions on what the problem might be? I have re-installed the software with the same results. I have also installed on another computer with same results.

Manual feed has been set to max with no effect.

Posted: **Fri 13 Jan , 2012 16:46 pm**

Check that the feed overide button is not on 0%.

Posted: **Mon 16 Jan , 2012 11:01 am**

It's also worth checking the jog keys definitions haven't been tampered with:
viewtopic.php?f=8&t=729

Denford Software & Machines

Microrouter will home but will not jog

Microrouter will home but will not jog

Re: Microrouter will home but will not jog

Re: Microrouter will home but will not jog