Re: No movement in the Z axis
Posted: Fri 15 Jan , 2010 9:33 am
Customer reports:
found the problem… found a black wire that was soldered to a brown wire. He re-soldered them, jogged it around an ran a simple test program. Seems to be working OK. He is putting it back together now.
It seems one of the BLOB joints was not very good!
found the problem… found a black wire that was soldered to a brown wire. He re-soldered them, jogged it around an ran a simple test program. Seems to be working OK. He is putting it back together now.
It seems one of the BLOB joints was not very good!