Compact Pro " Emergency Stop Message"

All info relating to the Denford MicroRouter Compact small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Compact Pro " Emergency Stop Message"

Post by bradders » Fri 08 May , 2009 7:28 am

Customer writes
I get an " Emergency Stop Message" on my Compact Pro, but the E Stop circuit etc is fully functioning, what can therfore be the cause of the error message?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Fri 08 May , 2009 7:30 am

A. It was found that the spindle motor bearings had started to seize up, and the spindle drive was initiating the "Emergency Stop Error"

Post Reply