Page 1 of 1
USA Produced Microrouter X axis spined toothed belt details
Posted: Thu 01 Feb , 2007 12:05 pm
by bradders
What is the specification of the USA Produced Microrouter "X" axis spined toothed belts ?
Posted: Thu 01 Feb , 2007 12:09 pm
by bradders
We have got two specifications but cannot 100% certain which is correct, but our best guess is option 1
1. 0.1" pitch X 395 teeth
2. 0.1" pitch X 393 teeth
Posted: Thu 01 Feb , 2007 12:21 pm
by bradders
Belt reference was SUPER-BELT FA-395
Posted: Thu 01 Feb , 2007 14:27 pm
by bradders
This is a difficult question to answer as the USA machines were not all built with the same parts each time!!
The US Microrouter used 3 different belts for the X axis during the course of the build here in the USA:
FA395
FS394
FS397
The numbers correspond to the number of teeth. The belts are all approx 38 7/8" overall length and approx 1/5" width. Sometimes there is a number on the belt that a customer can identify, this information is helpful in determining which belt it is.