USA Produced Microrouter X axis spined toothed belt details

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

USA Produced Microrouter X axis spined toothed belt details

Post by bradders » Thu 01 Feb , 2007 12:05 pm

What is the specification of the USA Produced Microrouter "X" axis spined toothed belts ?
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Thu 01 Feb , 2007 12:09 pm

We have got two specifications but cannot 100% certain which is correct, but our best guess is option 1


1. 0.1" pitch X 395 teeth

2. 0.1" pitch X 393 teeth
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Thu 01 Feb , 2007 12:21 pm

Belt reference was SUPER-BELT FA-395
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Thu 01 Feb , 2007 14:27 pm

This is a difficult question to answer as the USA machines were not all built with the same parts each time!!

The US Microrouter used 3 different belts for the X axis during the course of the build here in the USA:

FA395

FS394

FS397

The numbers correspond to the number of teeth. The belts are all approx 38 7/8" overall length and approx 1/5" width. Sometimes there is a number on the belt that a customer can identify, this information is helpful in determining which belt it is.
Top
Post Reply

Return to “MicroRouter”