this week my X has started jamming when doing a rapid move from the home position to the other side of the table. almost half way. if a run the x slower it does not jam.
is this common? is there a common fix?
thanks
X Jamming
Moderators: Martin, Steve, Mr Magoo
Re: X Jamming
It may just need lubricating with Silicone spray.
Otherwise the X axis nuts may need to be removed & cleaned out.
viewtopic.php?f=37&t=5500
Otherwise the X axis nuts may need to be removed & cleaned out.
viewtopic.php?f=37&t=5500