machine stops at every G code

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
papa_dogo
CNC Apprentice
CNC Apprentice
Posts: 38
Joined: Sat 08 Jun , 2013 0:54 am
Hardware/Software: microturn/vr turning/lathecamdesigner
micromill/vr milling

machine stops at every G code

Post by papa_dogo » Tue 13 Jun , 2017 19:50 pm

microrouter v4ns
running vr milling ver.2
every time the machine reaches a line that begins with "G" the machine stops. as a workaround, someone babysits the machine, hits pause and then play for the machine to move on. it works, but is annoying. i feel like i just have a setting wrong. any suggestions?

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: machine stops at every G code

Post by Martin » Tue 13 Jun , 2017 21:14 pm

What version of VRMilling 2 are you running?

papa_dogo
CNC Apprentice
CNC Apprentice
Posts: 38
Joined: Sat 08 Jun , 2013 0:54 am
Hardware/Software: microturn/vr turning/lathecamdesigner
micromill/vr milling

Re: machine stops at every G code

Post by papa_dogo » Fri 16 Jun , 2017 18:47 pm

the problem disappeared the last time the machine was restarted! wierd, since we had tried a power cycle...i wish all problems were this easy to solve.

Post Reply