what size is the t slot table

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
mike dempsey
Posts: 17
Joined: Thu 30 Jul , 2015 13:19 pm
Hardware/Software: microrouter v3 with 2.31
Location: Glenrothes
Contact:

what size is the t slot table

Post by mike dempsey » Wed 01 Jun , 2016 17:34 pm

What size is the t slot table that was originally supplied with the routers and how are they attached to the aluminium rails. Looking to get one shortly and I dont want to have to reinvent the wheel if necessart.

Many thanks

Mike

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: what size is the t slot table

Post by Steve » Thu 14 Jul , 2016 8:42 am

Here are a few bits that may help
Attachments
WORKTABLE.pdf
(21.58 KiB) Downloaded 738 times
WORKTABLE Model (1).pdf
(38.57 KiB) Downloaded 759 times

madebymccoy
Posts: 27
Joined: Tue 13 Dec , 2016 23:36 pm
Hardware/Software: Novamill
- in process of upgrading controller to Mesa I/O and LinuxCNC
- retrofitting head with power drawbar
- and next year, raise column by 70mm

Microrouter V3

Micromill 2000

Re: what size is the t slot table

Post by madebymccoy » Tue 11 Jul , 2017 16:46 pm

Are these tables still available, or where/are they a 3rd party item?

Thanks
J

User avatar
HunterScotty
Posts: 9
Joined: Sat 02 Dec , 2006 21:12 pm
Location: Scotland
Contact:

Re: what size is the t slot table

Post by HunterScotty » Sun 16 Jul , 2017 22:43 pm

Perhaps showing my ignorance:

The shape of the T-slots is curved towards the bottom and normal clamps' don't fit. Is this specific type of t-bed, with unique fittings and where can they be found?

Post Reply