Hi,
I have been able to draw items in Solidworks 2001, save them as STL files (as advised on this very site( ) onto a memory stick, and carry them across the room and load them into VR milling.
My question is . . .why do some elements of the drawing disappear?
For example a wheel, drawn with six holes will only cut four holes on one side, but if I flip the drawing it will only cut two of the six holes and not the outer edge of the wheel rim!
Weird of what?
cheers,
Chris
parts of drawing missing
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 9
- Joined: Wed 10 Feb , 2016 15:16 pm
- Hardware/Software: Denford CNC Microrouter V5 pro
solidworks 2011
Re: parts of drawing missing
Can you post a copy & also what diameter tool you are using? if the tool is bigger than the object it can't machine it. Not sure what would happen if it was a 6mm hole & a 6mm cutter.
-
- CNC Guru
- Posts: 613
- Joined: Tue 29 Apr , 2014 18:38 pm
- Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
Re: parts of drawing missing
from experience of machining 3d designs where a hole is the same dia as the cutter I have never had any success. I have always thought the post processors could do with being a bit clever and be able to identify a hole and to carry out a plunge/drill process rather than trying to carry out the process as part of a path. that or have an option to identify holes and specify how to deal with it.
I have resorted to 2.5d machining, creating a 2d file with plunge to required depths to do holes either before or after the 3d machining.
Pete
I have resorted to 2.5d machining, creating a 2d file with plunge to required depths to do holes either before or after the 3d machining.
Pete
-
- Posts: 9
- Joined: Wed 10 Feb , 2016 15:16 pm
- Hardware/Software: Denford CNC Microrouter V5 pro
solidworks 2011
Re: parts of drawing missing
Thanks Guys!
by dropping the motor down notch, and using a smaller diameter cutter ALL of the holes and features are now cut.
I am one happy bunny this morning
by dropping the motor down notch, and using a smaller diameter cutter ALL of the holes and features are now cut.
I am one happy bunny this morning