solidworks sketch to Microrouter V5

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
chrispotts
Posts: 9
Joined: Wed 10 Feb , 2016 15:16 pm
Hardware/Software: Denford CNC Microrouter V5 pro
solidworks 2011

solidworks sketch to Microrouter V5

Post by chrispotts » Wed 10 Feb , 2016 15:41 pm

being a newbee to this game i am at a bit of a loss.
find myself employed in a place with a Microrouter V5. the computers in the room are loaded with Solidworks 2011.
I am led to believe that the system worked in the past, but i cannot work out what format to save the drawings so that they can be transfered to the machine for manufacture.

any suggestions PLEASE

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: solidworks sketch to Microrouter V5

Post by Martin » Wed 10 Feb , 2016 17:11 pm

You should be able to export them as .STL files & then open them up in QuickCAM Pro to post process them.

Post Reply