Exploded diagram of the mechanics

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
cowpat
Posts: 13
Joined: Tue 20 Dec , 2011 17:56 pm

Exploded diagram of the mechanics

Post by cowpat » Thu 27 Sep , 2012 21:54 pm

I need to remove the Z axis from my microrouter to fit a completely different spindle motor.
Is there an exploded diagram of the mechanical components of the microrouter available for download anywhere?
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Exploded diagram of the mechanics

Post by Denford Admin » Mon 01 Oct , 2012 16:10 pm

Is this assembly drawing of any use ?
Attachments
NR1_0300A.pdf
(159.48 KiB) Downloaded 872 times
Top
cowpat
Posts: 13
Joined: Tue 20 Dec , 2011 17:56 pm

Re: Exploded diagram of the mechanics

Post by cowpat » Mon 01 Oct , 2012 17:01 pm

Yes that helps a lot. Thanks very much.
Top
Post Reply

Return to “MicroRouter”