Microrouter V5 Electrical Drawings

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
rasp
CNC Expert
CNC Expert
Posts: 123
Joined: Wed 06 Feb , 2008 18:33 pm

Microrouter V5 Electrical Drawings

Post by rasp » Sun 06 May , 2012 14:59 pm

Hi all,

is there a chance you could post up some electrical drawings that cover my Microrouter Pro V5 NS, serial no H04706 April 04

Thanks
Graham

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: Microrouter V5 Electrical Drawings

Post by bradders » Tue 08 May , 2012 10:11 am

I Hope these are the correct drawings
Attachments
Microrouter V5 Pro NS.rar
(325.41 KiB) Downloaded 872 times

User avatar
rasp
CNC Expert
CNC Expert
Posts: 123
Joined: Wed 06 Feb , 2008 18:33 pm

Re: Microrouter V5 Electrical Drawings

Post by rasp » Tue 08 May , 2012 11:18 am

Thanks for the drawings, unfortunately these are not the ones for my machine, here is a photo of the control, as you can see from the pictures my set up has an external Parker XLT50-S stepper driver and an additional PSU.

Is there a chance you still have the drawings for this version.

Regards
Graham
Attachments
DSCF0043.JPG
DSCF0043.JPG (142.81 KiB) Viewed 12328 times
DSCF0033.JPG
DSCF0033.JPG (193.39 KiB) Viewed 12328 times

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Microrouter V5 Electrical Drawings

Post by Steve » Wed 09 May , 2012 8:35 am

Have had a look and cannot find the drawing for your machine.

Do you have a problem with it? I can probably help with that.

The machine was redesigned in 2006 and i attach the schematic for that.

This drawing will show the stepper motor drives you have on the PRO but the relays are now on a PCB.

I attach the diagram for the Microrouter Compact This has the relay arrangement as you machine with the Delay timer and the spindle control relays.
Attachments
Compact 2003-2005.zip
(184.55 KiB) Downloaded 738 times
MICROROUTER PRO V5 NS.pdf
(136.53 KiB) Downloaded 876 times

User avatar
rasp
CNC Expert
CNC Expert
Posts: 123
Joined: Wed 06 Feb , 2008 18:33 pm

Re: Microrouter V5 Electrical Drawings

Post by rasp » Wed 09 May , 2012 8:59 am

Thanks Steve,

I don't have a problem, I was trying to work out if I could connect a 4th axis via another external drive.

Graham

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Microrouter V5 Electrical Drawings

Post by Denford Admin » Wed 09 May , 2012 13:20 pm

Have a look here:
viewtopic.php?f=54&t=3576

Step3 and Dir3 are the 4th axes

User avatar
rasp
CNC Expert
CNC Expert
Posts: 123
Joined: Wed 06 Feb , 2008 18:33 pm

Re: Microrouter V5 Electrical Drawings

Post by rasp » Thu 10 May , 2012 21:00 pm

Thanks for the tip.

Regards
Graham

Post Reply