(HELP NEEDED) MICROTURN/QUICK TURN 2

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
kokotis
Posts: 8
Joined: Mon 25 Oct , 2021 11:29 am
Hardware/Software: quick turn 2D
denford micro turn pro in schools

(HELP NEEDED) MICROTURN/QUICK TURN 2

Post by kokotis » Mon 11 Jul , 2022 10:28 am

Hello,

i am designing with quickturn2 and woring on a microturn pro. As you can see in the photo attached (photo link: https://prnt.sc/f0-G9nfaSAJM) , the program automaticaly cuts the upper half of my material. I need to make it cut from the bottom side, do you know if there is some option ?

Thank you in advance.

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: (HELP NEEDED) MICROTURN/QUICK TURN 2

Post by Steve » Tue 19 Jul , 2022 9:40 am

Hi The simulation always shows the cutting from the top so the tool library should not be edited
1.JPG
1.JPG (71.71 KiB) Viewed 3904 times
In Quick Tern 2D Design make sure you have the correct tool Library selected which will also create a program cutting from the front.
1.JPG
1.JPG (71.71 KiB) Viewed 3904 times
3.JPG
3.JPG (63.71 KiB) Viewed 3904 times
Attachments
2.JPG
2.JPG (24.7 KiB) Viewed 3904 times

Post Reply