Scanmill queston

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
marke
Posts: 1
Joined: Mon 27 Feb , 2017 14:05 pm
Hardware/Software: Scantech 2000 scanmill

Scanmill queston

Post by marke » Mon 27 Feb , 2017 14:35 pm

Hi all
I have an opportunity to get a used scanmill but I live in the US and I see on the spec tag that it supposed to run on 50 Hz but in the US we have 60 Hz, will this be ok?
Attachments
mini mill 015.jpg
mini mill 015.jpg (133 KiB) Viewed 6731 times

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: Scanmill queston

Post by Steve » Mon 27 Feb , 2017 21:55 pm

The machine will run on 50 or 60 Hz

Note it runs off an RS232 cable so you need a pc that has one or a USB to serial cable.

You also need to make sure you have software or you have to buy this.

Post Reply