Micromill 2000 with denstep vrmilling 1.75?
Moderators: Martin, Steve, Mr Magoo
Micromill 2000 with denstep vrmilling 1.75?
Hi, I have a US market micromill 2000 serial 60182 DOM 2002. I have vrmill 1.75 and the board is a denstep will this software work with this board? I have a straight through serial cable but not the one that came with the machine.
-
Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Micromill 2000 with denstep vrmilling 1.75?
Not sure what v1.75 is - are you sure that isn't the DOS software ?
vrmilling will be v2.xx or v5.xx
This guide should help you decide what you have got:
viewtopic.php?f=4&t=116
A pin-pin serial cable should be the right one for a US machine.
vrmilling will be v2.xx or v5.xx
This guide should help you decide what you have got:
viewtopic.php?f=4&t=116
A pin-pin serial cable should be the right one for a US machine.