Micromill Axis Do Not Move in Jog or Auto
Posted: Mon 09 Feb , 2009 14:57 pm
Customer writes in:
Micromill 2000 NS 11/06
VR Milling v2.31
When we run the program, in the Auto mode, the spindle motor turns on but nothing moves.
Nothing moves in the Jog mode, but we can turn the spindle On.
Micromill 2000 NS 11/06
VR Milling v2.31
When we run the program, in the Auto mode, the spindle motor turns on but nothing moves.
Nothing moves in the Jog mode, but we can turn the spindle On.