This is Eric Dixon from Thermosense Limited based in Radcliffe, Manchester. We have recently purchased an Easiturn 3 CNC Lathe Machine in an auction. The problem is, we have no experience in using CNC machines and was wondering if you know of anyone in the Manchester area that could offer any basic training and or setting up time on site. We know this is a shot in the dark but have been told by the manufacturer that because it is more than 25 years old that they cannot help us.
If you could response via email that would be ideal. Email address: eric.dixon@thermosense.co.uk or if you would rather call, please use 01628 531166.
Any help would be appreciated!
Best Regards,
Eric Dixon
EASITURN3 SETUP/BASIC TRAINING
All info relating to the Denford EasiMill and EasiTurn lathes and mills
Moderators: Martin, Steve, Mr Magoo
-
- Posts: 1
- Joined: Thu 08 Nov , 2018 12:49 pm
- Hardware/Software: Easiturn 3 CNC Lathe
Return to “EasiMill / EasiTurn”
Jump to
- Welcome
- ↳ Please read these first...
- ↳ Announcements
- CNC / Machines
- ↳ Machines
- ↳ Compact 1000
- ↳ Cyclone
- ↳ EasiMill / EasiTurn
- ↳ Meteor
- ↳ Micromill / Microturn
- ↳ MicroRouter
- ↳ MicroRouter Compact
- ↳ MicroRouter Vertical / MaxiRouter
- ↳ Mirac
- ↳ Novamill
- ↳ NovaTurn
- ↳ Orac
- ↳ PCB Engraver
- ↳ Quatro
- ↳ Router 2600
- ↳ Senior (Tom)
- ↳ StarMill
- ↳ StarTurn
- ↳ Triac
- ↳ Triton
- ↳ Turn270
- ↳ VersaLaser
- ↳ Viceroy
- ↳ VMC 1300
- ↳ ZeroCentre/ZeroTurn/ZeroBore
- ↳ Electronics
- ↳ Software
- ↳ Downloads
- CAD / CAM Software
- ↳ QuickCAM / LaserCAM 2D Design
- ↳ QuickCAM 3D/PRO/4D
- ↳ QuickTURN 2D Design
- ↳ TechSoft 2D Design
- ↳ Post Processors
- ↳ Solidworks
- ↳ VR Milling - All Versions
- ↳ VR Turning - All Versions
- ↳ Other CAD CAM and CNC
- 3D Printing / Rapid Prototyping
- ↳ UP! 3D Printer
- General
- ↳ Project Of The Week
- ↳ Denford Classifieds
- ↳ F1 / 4x4 / GT Racing In Schools
- ↳ Suggestions and Feedback
- ↳ User Stories / Projects / Courseware
- CIM
- ↳ Robots / CIM / VR CIM
- Random Picture Galleries
- ↳ Vintage Pictures