following error 070

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
law
Posts: 2
Joined: Fri 23 Sep , 2011 9:31 am

following error 070

Post by law » Sat 22 Jul , 2017 16:44 pm

Hi, I have an easiturn 3 with a fagor 8020 control that has just developed a following error X axis problem (070).
When I press manual mode (5) the M/C tries to "home"...... but in the wrong direction in both axis ! It moves about 50mm then stops with the 070 error message.
Can anyone suggest any possible reasons for this????

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: following error 070

Post by Martin » Mon 24 Jul , 2017 7:59 am

We only ever built a few machines fitted with Fagor controls.

It may be worth checking the machine parameters if you have a list.

Post Reply