denford easiturn retro

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
jekran
Posts: 6
Joined: Mon 26 Apr , 2010 11:15 am
Location: malta
Contact:

denford easiturn retro

Post by jekran » Sat 08 May , 2010 20:41 pm

hi guys i start my restoration on the lathe i will drive this machine with mach3

please let me know some comments
Attachments
IMG_1766.JPG
IMG_1766.JPG (106.91 KiB) Viewed 12833 times

User avatar
jekran
Posts: 6
Joined: Mon 26 Apr , 2010 11:15 am
Location: malta
Contact:

Re: denford easiturn retro

Post by jekran » Sun 09 May , 2010 10:02 am

an other
Attachments
IMG_1811.jpg
IMG_1811.jpg (84.14 KiB) Viewed 12823 times
IMG_1811.jpg
IMG_1811.jpg (84.14 KiB) Viewed 12823 times

User avatar
jekran
Posts: 6
Joined: Mon 26 Apr , 2010 11:15 am
Location: malta
Contact:

Re: denford easiturn retro

Post by jekran » Wed 30 Jun , 2010 17:14 pm

some more photo almost ready
Attachments
IMG_1845.jpg
IMG_1845.jpg (55.72 KiB) Viewed 12777 times
IMG_1843.jpg
IMG_1843.jpg (51.95 KiB) Viewed 12777 times
IMG_1842.jpg
IMG_1842.jpg (64.28 KiB) Viewed 12777 times

User avatar
jekran
Posts: 6
Joined: Mon 26 Apr , 2010 11:15 am
Location: malta
Contact:

Re: denford easiturn retro

Post by jekran » Wed 30 Jun , 2010 17:16 pm

some work been done denford
Attachments
IMG_1853.jpg
IMG_1853.jpg (28.22 KiB) Viewed 12777 times

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: denford easiturn retro

Post by bradders » Thu 01 Jul , 2010 8:11 am

Brilliant, Nice to see our old machines back up and running

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: denford easiturn retro

Post by Denford Admin » Thu 01 Jul , 2010 8:34 am

Yes that looks like an excellent retrofit :D
Was that a test part, or something you are going to be making on the machine ?

User avatar
jekran
Posts: 6
Joined: Mon 26 Apr , 2010 11:15 am
Location: malta
Contact:

Re: denford easiturn retro

Post by jekran » Thu 01 Jul , 2010 20:48 pm

thanks guys for your compliments
that part was one of a small prodution that was made with the denford easiturn 3 i am still on testing the machine and now i need to make a ATC 8 position i will post some photo in the near future

nemo1966
CNC Apprentice
CNC Apprentice
Posts: 38
Joined: Wed 09 Oct , 2013 16:56 pm
Hardware/Software: None yet!

Re: denford easiturn retro

Post by nemo1966 » Wed 16 Oct , 2013 0:48 am

Anyone in the uk know the paint codes and type of paint used?

Thanks
Steve

Post Reply