Easimill 3

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Gee
Posts: 1
Joined: Mon 12 Jan , 2009 16:04 pm

Easimill 3

Post by Gee » Mon 12 Jan , 2009 16:13 pm

Anyone know how to connect a external TV monitor or know where i buy spare screen for a easimill 3
Top
User avatar
Roy
CNC Expert
CNC Expert
Posts: 104
Joined: Tue 30 Jan , 2007 20:20 pm
Hardware/Software: 1986 Triac modified & running Mach 3
Location: Bucks, UK

Post by Roy » Mon 12 Jan , 2009 18:42 pm

I have a small monitor which came from my Triac. A green on black screen.

I don't know if this is the same as the easimill, but if it is any of use. It is either free for collection, or cost of courier.

Thanks, Roy
Attachments
41f3_1.jpg
41f3_1.jpg (31.36 KiB) Viewed 3534 times
Top
User avatar
Mr Magoo
CNC Guru
CNC Guru
Posts: 301
Joined: Tue 21 Feb , 2006 21:45 pm
Location: Brisbane, Australia

Post by Mr Magoo » Tue 20 Jan , 2009 23:23 pm

If your easimill has a video-out connector (I can't remember if they did or not?) then it will be Composite-video out, not a TV out. (Can be a bit confusing becuase the connector is a tv-aerial type)

If it does, then you need a monitor (or tv) that has composite-video in
Top
Post Reply

Return to “EasiMill / EasiTurn”