Easimill Help Please

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
composites
Posts: 3
Joined: Wed 21 Mar , 2007 2:29 am
Location: Yeovil, Somerset, UK

Easimill Help Please

Post by composites » Thu 18 Oct , 2007 14:35 pm

Upgrading Easimill 3 with dead PNC control (display faulty).

Is it possible to get a copy of the wiring diagrams for this machine, in particular the drg for the connections to the spindle inverter ?

ID Plate reads;
Model: TDS/E/M/CNC Date: Sept 1984
Serial: 32232 Control Serial: 3206
Wiring Diagrams A3-200014/26/28/29

Thanks - Steve
:)
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Thu 18 Oct , 2007 15:45 pm

Remember Denford's on your Christmas card list. I have dusted off 1\4" of dust off these drawings
Attachments
A3-200029.pdf
(56.46 KiB) Downloaded 632 times
A3-200028.pdf
(60.03 KiB) Downloaded 624 times
A3-200026.pdf
(74.39 KiB) Downloaded 647 times
A3-200014.pdf
(74.31 KiB) Downloaded 654 times
Top
composites
Posts: 3
Joined: Wed 21 Mar , 2007 2:29 am
Location: Yeovil, Somerset, UK

Post by composites » Mon 22 Oct , 2007 0:21 am

Many thanks, that will certainly make the task a lot easier.
Top
Post Reply

Return to “EasiMill / EasiTurn”