Hi all
As i mentioned in my former email,i own a PNC 4S mill controller
CPU 8085/80c31 ,
V 5.088G , 26-03-93 10MHZ
I reprogramed all parameters but i cant energise power drives relay ( if i do it manualy drives work)
All diagnostics RAM-ROM etc. reports OK
So i think without electric diagrams i shall not find the problem.
Please ask for help.
THANK YOU
pnc4s problem
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3636
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: pnc4s problem
I have added another manual here:
viewtopic.php?f=34&t=3030
viewtopic.php?f=34&t=3030