Cyclone TU 150 E boot up problem

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Cyclone TU 150 E boot up problem

Post by bradders » Tue 03 Apr , 2007 11:43 am

Cyclone TU 150 E will not boot up. Floppy disk does not operate and message, after Bios details and ram passed, "previous boot incomplete - Default configuration used" then "keyboard error". A single bleep and then screen clears. Next the bios details reappear and it repeats all over again. Can you offer any advice to help me sort this out please.
Top
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:
Contact bradders

Post by bradders » Tue 03 Apr , 2007 11:44 am

It could be the 5 volts power supply just need tweaking up a bit as it trips out around 4.9v
Top
Post Reply

Return to “Cyclone”