spindle alignment

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
hpe
Posts: 22
Joined: Sat 13 May , 2017 7:53 am

spindle alignment

Post by hpe » Sun 26 Sep , 2021 13:37 pm

any tips or tricks?

my cyclone is cutting on a taper ,ie 24mm at chuck , 24.2 50mm out
it looks like there are m10 bolts holding the spindle body to the casting

allen bolts look fiddle to get to

so any tips for trying to get this to cut parallel

cheers

Post Reply