Cyclone TU150U Won't start up

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Pedja2405
Posts: 1
Joined: Sat 25 Sep , 2021 15:00 pm

Cyclone TU150U Won't start up

Post by Pedja2405 » Sun 26 Sep , 2021 8:41 am

Hi everyone. I bought it recently and I haven't been able to start up. Only alarm beep and I dont know meaning of that sound.She didn't work for a long time. Thanks for your comments

https://youtu.be/9qpcD7nQGoQ
https://youtu.be/2-fw1IqcK7w
https://youtu.be/0JEa8ZZl3co
https://youtube.com/shorts/Mx3YJNx3K4g?feature=share
Attachments
IMG-26f0df801378738ccf855b5b339e8252-V.jpg
IMG-26f0df801378738ccf855b5b339e8252-V.jpg (244.2 KiB) Viewed 4614 times
IMG-540d6bdb780f30a41b876034d1463f28-V.jpg
IMG-540d6bdb780f30a41b876034d1463f28-V.jpg (326.18 KiB) Viewed 4619 times
IMG-22ce5ce95bbbca6716000e973e8ce9f6-V.jpg
IMG-22ce5ce95bbbca6716000e973e8ce9f6-V.jpg (265.17 KiB) Viewed 4619 times
IMG-c121f5299f1c1dd99ac73e1045da21e7-V.jpg
IMG-c121f5299f1c1dd99ac73e1045da21e7-V.jpg (297.45 KiB) Viewed 4619 times
IMG-b14f8a3c8f40aee65f3456fc097afcce-V.jpg
IMG-b14f8a3c8f40aee65f3456fc097afcce-V.jpg (239.69 KiB) Viewed 4619 times
IMG-6b7617119381b2dace6eb1692206f480-V.jpg
IMG-6b7617119381b2dace6eb1692206f480-V.jpg (254.86 KiB) Viewed 4619 times
IMG-1191fb74c97497790803a9ba62c44c79-V.jpg
IMG-1191fb74c97497790803a9ba62c44c79-V.jpg (227.42 KiB) Viewed 4619 times
IMG-500a91727f41ce419f3775fef66a684c-V.jpg
IMG-500a91727f41ce419f3775fef66a684c-V.jpg (232.56 KiB) Viewed 4619 times
IMG-1da37602ffdcf1f8684621e399e7f6a5-V.jpg
IMG-1da37602ffdcf1f8684621e399e7f6a5-V.jpg (268.7 KiB) Viewed 4619 times
IMG-4713980e54a28fd253a2c68e74cde3a1-V.jpg
IMG-4713980e54a28fd253a2c68e74cde3a1-V.jpg (228.07 KiB) Viewed 4619 times
IMG-0fa1c866c18b2f36460abc79d5f8b489-V.jpg
IMG-0fa1c866c18b2f36460abc79d5f8b489-V.jpg (225.59 KiB) Viewed 4619 times

Edis
Posts: 25
Joined: Fri 19 Aug , 2016 7:04 am
Hardware/Software: Harrison TU150U -96

Re: Cyclone TU150U Won't start up

Post by Edis » Sun 26 Sep , 2021 9:45 am

Hello!

I haven´t used mine in a long time, and the last time one om my servos didn´t start so I´m pretty irritated on mine :oops:

It´s a computer that has to start, it´s good to have an external keyboard (a really old one with the giant round contact), that you can attach on the side where the floppy disc is.

It´s hard to say if your screen is broken or of it´s the computer. I don´t remember if there is any VGA-port you can test another screen.

But you will need a start disc in the floppy driver, did you get any 3.5" floppy disc?

Post Reply