Drawing for bed

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
mike2424
CNC Apprentice
CNC Apprentice
Posts: 47
Joined: Sun 25 Oct , 2015 18:30 pm
Hardware/Software: cyclone tu150e /fanuc

Drawing for bed

Post by mike2424 » Fri 30 Jul , 2021 14:16 pm

Hello all, I seem to remember somewhere on here where there were drawings with dimensions for things like the bed for a cyclone . I was going to try and fab one up and I was looking for that drawing for the dimensions. Any help would be greatly appreciated. Thanks Mike

mike2424
CNC Apprentice
CNC Apprentice
Posts: 47
Joined: Sun 25 Oct , 2015 18:30 pm
Hardware/Software: cyclone tu150e /fanuc

Re: Drawing for bed

Post by mike2424 » Sun 15 Aug , 2021 19:55 pm

I found it.

Max
Posts: 9
Joined: Tue 18 May , 2021 10:34 am
Hardware/Software: 2x Denford Cyclones - Fanuc

Re: Drawing for bed

Post by Max » Sun 22 Aug , 2021 15:09 pm

Hello,

Could you please post it via PDF?

mike2424
CNC Apprentice
CNC Apprentice
Posts: 47
Joined: Sun 25 Oct , 2015 18:30 pm
Hardware/Software: cyclone tu150e /fanuc

Re: Drawing for bed

Post by mike2424 » Tue 14 Sep , 2021 23:11 pm

I'm sorry I just did now notice this reply to my post, please forgive me for my tardiness. However I know I said bed but what I meant was the tail stock bed. And I did see that it's in the tail stock dimensional drawings. I hope I didn't keep you waiting unnecessarily. I am going to build the bed and the tail stock. I have a TU-150E, here in the States and it's been a struggle all along as nobody here has a clue. I have done everything I could trying to keep it original. I do need to make pictures and videos which I haven't, but I will. And then I will post them. Take care, Mike

Max
Posts: 9
Joined: Tue 18 May , 2021 10:34 am
Hardware/Software: 2x Denford Cyclones - Fanuc

Re: Drawing for bed

Post by Max » Sat 25 Sep , 2021 0:45 am

mike2424 wrote:
Tue 14 Sep , 2021 23:11 pm
I'm sorry I just did now notice this reply to my post, please forgive me for my tardiness. However I know I said bed but what I meant was the tail stock bed. And I did see that it's in the tail stock dimensional drawings. I hope I didn't keep you waiting unnecessarily. I am going to build the bed and the tail stock. I have a TU-150E, here in the States and it's been a struggle all along as nobody here has a clue. I have done everything I could trying to keep it original. I do need to make pictures and videos which I haven't, but I will. And then I will post them. Take care, Mike
No, no worries!, i have a full detail cad model of the tailstock unit for the cyclone, ive attached an image.

Please post them it would be very interesting,

Best regards,

Max
Attachments
tailstock.png
tailstock.png (172.17 KiB) Viewed 6225 times

mike2424
CNC Apprentice
CNC Apprentice
Posts: 47
Joined: Sun 25 Oct , 2015 18:30 pm
Hardware/Software: cyclone tu150e /fanuc

Re: Drawing for bed

Post by mike2424 » Thu 30 Sep , 2021 16:04 pm

Max, I will be posting those pics and videos when I can, you take care. Mike

Post Reply