RH80-6 drawings

All info relating to the Denford Cyclone lathes

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
mr_cnc
Posts: 17
Joined: Thu 06 Jun , 2019 13:08 pm
Hardware/Software: Denford Cyclone

RH80-6 drawings

Post by mr_cnc » Wed 04 Dec , 2019 9:04 am

Hi all, I have miss programmed and caused my RH80-6 turret to jam, it will move off the hirth coupling but won't spin to the next programmed station, are there drawings available so I can see how to fix it?

thanks Russ

Dangle_kt
Posts: 25
Joined: Mon 27 Mar , 2017 9:54 am
Hardware/Software: Denford Novamill
Denford Startturn 8 with turret
Haas TM1
A big hammer
Fusion 360 CAD/CAM

Re: RH80-6 drawings

Post by Dangle_kt » Fri 27 Dec , 2019 17:43 pm

I had this issue, but it ended up being I had the 3 phase in the wrong order into the back of the machine.

Where is it jamming? something under the turret onto the slant bed?

Post Reply