Fanuc 413 alarm LSI Over

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Bakes144
Posts: 11
Joined: Tue 13 Nov , 2012 9:02 am

Fanuc 413 alarm LSI Over

Post by Bakes144 » Sat 20 Jul , 2013 16:59 pm

I have a denford senior 200 which is similar to the Cyclone. I occasionally have trouble with a 413 alarm on the x-axis but I cannot get rid of it. Some say it can be incorrect settings... Where do I start?! I have taken tr motor off to look for lose connections but maybe have missed something?

Thanks!

Paul
Top
Bakes144
Posts: 11
Joined: Tue 13 Nov , 2012 9:02 am

Re: Fanuc 413 alarm LSI Over

Post by Bakes144 » Sat 20 Jul , 2013 21:41 pm

I have read somewhere that improperly set parameters can be to blame for this alarm occurring. I have the parameters set as per the manual, could there be an encoder problem?
Top
Martin
CNC Guru
CNC Guru
Posts: 1901
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Fanuc 413 alarm LSI Over

Post by Martin » Mon 22 Jul , 2013 15:35 pm

Have you seen this post?

viewtopic.php?f=52&t=910&hilit=413
Top
Post Reply

Return to “Cyclone”