I am on the lookout for a cyclone tailstock if anyone has one thats for sale, which I doubt.
I need to know where it actually fits on the machine? I have the drawing thats included in the parts list on this site, alas it has no dimensions, but thats not the end of the world if I can understand its fixing and operation, then attempt to make one !!
Bob
Cyclone Tailstock
Moderators: Martin, Steve, Mr Magoo
-
Lone_Ranger
- CNC Expert
- Posts: 221
- Joined: Mon 01 Oct , 2007 15:23 pm
- Contact:
Re: Cyclone Tailstock
Hi Bob
It is a pretty big casting that mounts to the 3 machined faces along the front of the main casting and also sits on top of them.
Here is a link to photos of a Harrison (Cyclone under another name
)machine that was up for sale a while ago with a tailstock fitted.
http://www.wotol.com/1-harrison-max-500 ... _id/186753
Regards
Rob
It is a pretty big casting that mounts to the 3 machined faces along the front of the main casting and also sits on top of them.
Here is a link to photos of a Harrison (Cyclone under another name
)machine that was up for sale a while ago with a tailstock fitted.http://www.wotol.com/1-harrison-max-500 ... _id/186753
Regards
Rob
-
Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Cyclone Tailstock
Hopefully this is enough information to knock one up yourself:
viewtopic.php?f=33&t=3132
viewtopic.php?f=33&t=3132